|
|
 Contact
us!
Quick Fitting , Inc. is here to support you. We are more than happy to answer any question you might have about Quick Fitting , Inc. or the COPRO™ push-to-connect piping system.
Address
Quick Fitting , Inc.
P.O. Box 164
Tiverton, RI 02878
Telephone/Fax
877-238-4826
877-258-4826
(fax)
|
|
|
|
|
|
|
|
|
NEW! 1/4 Turn Quick Connection!
COPRO's
quick connect
1/4-turn ball valve is simple and quick to install.
Each fitting comes with one 1/2" COPRO CxMI fitting to quickly connect your ball valve system to any 1/2" pipe with absolutely no soldering! Just push it on. A shallow pipe cover is
also provided. (covers
rough opening in wall or floor) Great for domestic
or commercial water systems. Any 3/8 " toilet connector or faucet connector will work with the COPRO Angle ball valve!
No soldering, no mess, just push-to-connect your
plumbing system.
Works with Copper, PEX and CPVC
 
|
| |
|
NEW!
1/2" and 3/4" Full Flow, Push Connect Ball Valves! (Patent Pending)
Forged in high-quality Brass, our integrated (Patent Pending) push ball valves
install
in
seconds
with no glues, solder or compression. Our line
of Copro Ball Valves are built to last and cary
our exclusive 25-Year warranty.
Install
our valves and you'll notice the Copro difference
in
our
quick sealing, innovative design, high quality finsih
and
full flow porting for no reduction in flow. Removable, repairable and reusable!
|
Works
with Copper, PEX and CPVC |
| |
|
Works with Copper, PEX and
CPVC
|
NEW! 1/2" Push X 3/8" Comp. Chrome Plated Stop Valves (Patent Pending)
Whether you require a straight or angle turn 1/4 turn stop valve, Copro has the valve for you! Simply push to connect and instantly create
a
perminent watertight seal on hot or cold water,
heating systems or industrial applications. Compare
our patent pending valve technology. Great for any potable water application, including tight or hard-to-reach places.
Copro push connect stop valves by Quick Fitting Inc. |
| |
|
NEW!
1/2" Push X 3/8" Comp. Chrome Plated "Quick Release" Stop Valves (Patent Pending)
Copro's patent pending stop valve technology makes it simple to connect or disconnect
our
integrated
push to connect technology in any application. GREAT for remoldling! For example, when replacing vanity,
you
can
relieve the water
pressure,
simply cut your soldered connection off,
replace the vanity, clean
the
surface of the Copper, PEX, CPVC, then push on our stop valve for a
perminent
seal.
|
Works with Copper, PEX and CPVC
|
NEW
COPRO Products
Just
when you thought COPRO quick connection fittings couldn't
get any easier - they did! COPRO plans on releasing
several quick connect ball valves next quarter. Quick
connect Stop Valves and quick connect, Full Port, Ball
Valves, available in 3/4" and 1/2," will allow you to quickly connect a stop valve without soldering. Some other
fittings which will soon be available are freezeout
valves, quick connect flow valves, and quick connection
fittings up to 4 inches!
Learn More...
|
|
|
|
|
|
