COPRO Fitting Certifications CertificationsIAPMO and NSF-61 Approved!

COPRO quick connection fittings have been tested thoroughly using copper, CPVC,PEX, and stainless steel. Examples of how Quick Fitting , Inc. guarantees the safety and quality of its products are the certifications by IAPMO Research and Testing, DVGW German standard, and NSF/ANSI Standard 61 (Drinking Water System Components).

Quick Connect System

  • Manufactured to the quality system of ISO 9001 and NSF-61 certifications.

Fittings

  • NSF-61 certified and have a maximum operating pressure of 200 PSI at a maximum continuous operating temperature of 180°F. Higher temperatures and pressures are permissible; please consult with manufacturer.
  • Fittings utilize forged yellow brass bodies meeting ASTM B-283 standard with stainless steel gripping teeth and shall use EPDM seals that are certified to NSF-61 service
  • Fittings shall use NSF-61 approved pre-lubricated EPDM seals - No lubrication necessary
  • Fittings are tested to the stringent German DVGW, British WRC, and French ATEC standards.

 

IAPMO Approved

COPRO fittings have been Manufactured in compliance with IAPMO IGC 188-04c and received IAPMO's UPC seal. In addition, COPRO quick connection plumbing fittings comply with the new ASSE 1061 standard established in 2006.

View the Official Testing Specifications
   
NSF 61 Approved

NSF International Certifies that the products appearing on this Listing conform to the requirements of NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects.

View the Official Listing recorded on June 9, 2006.

   
DVGW Testing Standards

Tests were performed on copper and Stainless Steel. COPRO's standards are much higher than the DVGW standard, which is known as the strictest standard in the world - even more than IAPMO. COPRO products will stand up to 1000 daN (2250 pounds) pull force while the DVGW specification is 340 daN(765 pounds.) As you can see COPRO products exceed the DVGW specifications!

Click here to view the Official Testing Specifications.
   
ASSE

The American Society of Sanitary Engineers has developed a new standard of listing approval for quick connection plumbing fittings used on potable water. This standard, ASSE 1061, was approved in July 2006.

Copro, which has already received IGC-188 approval and NSF61, has been tested to the ASSE 1061 standards for all of it's quick connection plumbing products.

 

Compare COPRO Fittings

Full Flow Fittings

 

Copyright © 2005, Quick Fitting , Inc. design by Zeus Please read our Privacy Policy and Terms of Use